Find Sodium Silicate, Neutral Grade Sodium Silicate, Solid Sodium Silicate on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Other Chemical Products > Sodium Silicate > Instant powdered sodium silicate

Instant powdered sodium silicate

Product Description

Sodium Silicate, commonly known as saponin, is a water-soluble silicate. Its aqueous solution, commonly known as water glass, is a mineral binder. The chemical formula is R2O·nSiO2, wherein R2O is an Alkali metal oxide, and n is a ratio of the number of moles of silica to the alkali metal oxide, and is called the mole number of the water glass. The water glass commonly used in construction is an aqueous solution of sodium silicate. (Na2O·nSiO2)

Chinese name: Sodium silicate
English name: Sodium silicate
Aliases: saponin, water glass
Chemical formula: Na2SiO3·9H2O
Molecular weight: 284.2
CAS registration number: 1344-09-8; 106985-35-7
EINECS accession number: 215-687-4
Melting point: 1089 ° C
Boiling point: 2355 °C (lit.)
Water solubility: H2O: soluble
Density: 2.33 g/mL at 25 °C (lit.)
Appearance: a viscous liquid that is colorless, light yellow or blue-gray transparent.
Application: as an analytical reagent, fabric fire retardant and adhesive
Hazard symbols: F, Xi, T, C
Hazard Description: 11-36/38-34-23/24/25-36/37/38-35-20/21/22-37
Dangerous goods transport number: UN 2922 8/PG 2
Relative density: 2.614
Refractive index: 1.520

Water Glass Sodium Silicate

Physical and chemical properties: strong adhesion, high strength, good acid resistance, heat resistance, poor alkali resistance and water resistance.
Chemical formula: Na2SiO3·9H2O
Properties: colorless orthogonal bipyramidal crystal or white to off-white block or powder. Can be weathered. Six molecules of crystal water were lost at 100 °C. Soluble in water, soluble in dilute sodium hydroxide solution, insoluble in ethanol and acid. Melting point 1088 ° C. Low toxicity, half lethal dose (rat, oral) 1280mg/kg (no crystal water)
Storage: Sealed in a cool, dry and preserved condition.
Uses: Analytical reagents, fire retardants, adhesives.

Use of water glass

  • Applying the surface of the material to improve its weathering resistance. Impregnating or painting porous materials such as clay brick, cement concrete, Portland concrete, stone, etc. with water glass with a density of 1.35g/cm3 can improve the compactness and strength of the material. , impermeability, frost resistance and water resistance.
  • Reinforced soil The water glass and calcium Chloride solution are alternately injected into the soil, and the generated silicic acid gel is in a humid environment, and the soil is in an expanded state due to absorption of soil moisture, thereby consolidating the soil.
  • Formulating a quick-setting waterproofing agent.
  • Repairing the cracks in the brick wall After the water glass, the granulated blast furnace slag powder, the sand and the sodium fluorosilicate are mixed in an appropriate ratio, they are directly pressed into the cracks of the brick wall to bond and reinforce.
  • sodium silicate aqueous solution can be used as the outer surface of the fire door.
  • can be used to make acid-resistant clay for the inner lining of the furnace. Physicochemical properties
  • preparation of silica gel

The mixing ratio of quartz sand and alkali, ie the molar ratio of SiO2 and Na2O, determines the modulus n of sodium silicate, and the modulus shows the composition of sodium silicate. The modulus is an important parameter of sodium silicate, generally 1.5 to 3.5. between. The larger the modulus, the harder the Solid Sodium Silicate is dissolved in water. When n is 1, the normal temperature water can be dissolved. When n is increased, hot water is needed to dissolve. When n is greater than 3, steam of 4 atmospheres or more is required to dissolve. The larger the modulus of sodium silicate, the more the content of silicon oxide, the higher the viscosity of sodium silicate, the easier decomposition and hardening, and the increased adhesion. Therefore, different modulus of sodium silicate has different uses. Widely used in common casting, precision casting, paper, ceramics, clay, mineral processing, kaolin, washing and many other fields.
Modification principle: Na2SiO3+CO2+H2O=H2SiO3↓+Na2CO3

Contact us if you need more details on Water Glass Sodium Silicate. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sodium Silicate Liquid、Sodium Silicate in Soap. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Other Chemical Products > Sodium Silicate